Since you're converting the file twice, there's a chance that the file could get corrupted in the process. If that happens repeatedly, then try this next method. You can also edit the DMG or extract the contents, and there's also an option to copy it to a disk.
You will need to give admin privileges to the software. Alternatively, you can run the program as admin when you launch it. You should be able to see the progress, and a new popup will appear when the bootable media is ready. You can now eject the media and use it to run the DMG on a Mac computer. All of these methods are workable, so select the right one for you based on your level of knowledge and your preference. Are you planning to install Windows 10 on your computer?
If so, then you have to know that part of the process involves the creation of a USB media, which you will use to boot your computer into the setup wizard. This is especially true when dealing with a relatively new computer.
So, before you proceed with the creation of a bootable media, you have to ensure it can support the firmware that you are using. On a positive note, when dealing with a computer that supports UEFI firmware, you have two major options in creating a USB bootable media. Your second option is to use Rufus, a third-party tool that allows you to create an installation device, specifically for devices that support UEFI firmware.
Insert a USB flash drive with at least 4GB free storage space into your computer and follow the steps below:. Just take note that in this method, you will have to download the Windows 10 ISO file manually.
It may be disk3 or disk4. This will probably only take about 20 seconds on a newer computer, but may take longer on an older computer. Note that for some hardware, you may instead need to run this command, which uses the MBR format for partitioning instead of GPT. Come back and try this command if step 7 fails, then redo steps 5, 6, and You will need to check where your downloaded Windows 10 ISO file is and use that.
So I'll show you how to copy it over separately. Thank you to alexlubbock for coming up with this workaround. Then run this command. Don't abort it.
It will use wimlib to split the install. Some novice users might wonder, what's the principle of the portable USB drive? Why can I use a completely different system on a Mac computer?
Actually, the Mac computer doesn't represent the macOS system. The factor that determines the computer's operating system is which operating system Windows system or macOS you have, not the computer brand. In this article, we have introduced the easiest method of using the Windows system on a Mac computer. Store Download Support Live Chat. One-click clone the entire system drive to a connected USB device 3.
Was This Page Helpful? You will use Boot Camp Assistant to install Windows An external USB flash drive with a storage capacity of 16GB or more, unless you're using a Mac that doesn't need a flash drive to install Windows. If installing Windows on your Mac for the first time, this must be a full version of Windows, not an upgrade. Then follow the onscreen instructions. Unplug any external devices that aren't necessary during installation.
0コメント